Results 1 to 6 of 6
Hybrid View
-
03-05-2014, 03:11 PM #1
You need a minimum of 11 amps on the 12v supply side. I'm using an old ATX 18 amp supply and it works great.
Bambu P1S/AMS
NVision4D http://nvision4d.com
You need a minimum of 11 amps on the 12v supply side. I'm using an old ATX 18 amp supply and it works great.
Bambu P1S/AMS
NVision4D http://nvision4d.com
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion