Hello,
I previously have used a solidoodle v2 to print a few objects, now I want to buy a printer so I dont have to drive an hour to use a printer. After a ton of research I found the prusa 8 inch i3 on more than a fair share of sites saying it is a top 5 contender for best all around printer for the value. My problem is the solidoodle was preset and ready to roll with nearly no setup all I needed to do is add my model to the pc hooked to the printer and go. Since I have no experience with the setup or maintenance of the printers should I go ahead and order this or should I look for a different model for me? I am confident I can assemble it with my modest soldering skills and wiring aptitude, but the calibrations I am unsure of. Is this a fairly user friendly printer? I dont mind experimenting a bit but I didnt want to spend weeks just to get a fair print. I also wanted to know what nozzle size I should get with this IF you recommend it. Thanks