Results 1 to 10 of 12
Thread: Improving Heat Bed performance
Threaded View
-
02-12-2014, 06:40 PM #8
I fitted the relay for the extruder head heater. Typically, I put Tab A in Slot B and I think I've let the smoke out of the circuit. Now I've got a runaway heater element and the only solution is to replace the RAMPS board. I think I also frizzled the USB port the printer was connected to :-(
OME
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials