Results 1 to 6 of 6
Thread: MakerFarm i3v 10" Review
Threaded View
-
10-09-2015, 09:00 PM #4
- Join Date
- Jul 2014
- Posts
- 305
I have been really frustrated with my Prusa for a while. I think the main issue is that Colin doesn't care about quality. I first noticed this when the Greg Wades Extruder that came with the kit was a terrible print. It has banding issues, warping issues and just wasn't a good product to provide with a printer you are selling.
After I realized that I stopped asking Colin for advice, he wants to get the printer to work but that's it.
Then I decided to spend some money and get the printer to work as I intended. I upgraded the Y bed to aluminum and installed a SSR with PID, I changed as many of the stock parts as I could and tightened my belts. Please note, I do not have Autobed Level and do not intend to install it. If your bed is not warping with speed I can manually level the bed and not change it for a long time.
Ever since then, my prints have been acceptable and I am slowly improving the prints.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials