Show your RepRap Printers

[REPRAPSQUAD]

I'm just finishing up the newest mods and getting it ready to fire up again. I'll update once I break the sound barrier. It should be all calibrated within the next week or so as dual extruders can be a pain but, I have faith that it should be ready for speed tests soon.

[vandborg]

Hi Printers out there.

My printer is RepRapPro Mendel with a Melzi board. It is still in the testing phase, but the only thing I need to do, is calibrathing the extruder. Then is it time for printing. Here is a picture of the animal: Img_4517.jpg

[Kirschner3D]

IMG_0447.jpg

this is our printer with double extruder and increased printing surface using 2 heated plates.
We also got 3 prusa i3 printers and 1 prusai2, but they are standard.
thought this one would fit better here.

we're changing the extruder build because now it is not easy accesible.

[REPRAPSQUAD]

IMG_0447.jpg

this is our printer with double extruder and increased printing surface using 2 heated plates.
We also got 3 prusa i3 printers and 1 prusai2, but they are standard.
thought this one would fit better here.

we're changing the extruder build because now it is not easy accesible.

How did you run your power supply setup with 2 heated beds. I'm planning on taking the same road but the psus is something I still need to complete.

[JohnA136]

Did you just run two build plates and lock them onto one belt, than cut the borosilicate glass double long? I imaging you have to run a second PS to heat up the second HBP? Looks good!

[Osama Kamal]

I've made my own design for the mechanical structure ... and um using the RepRap electronics .. here is my machine ... coming live very soon
04122013608.jpg

[papabur]

Ooooh very exciting, cant wait to see finished product and prints!!! Definitely keep us posted please! Kits? Are you planning on offering kits if and when the prototype is done? Just asking..

[ciutateivissa]

Thank you for the compliment!

The I3 was a kit I bought myself, but because of some improvements it looks a bit different now. As I mentioned before, I´m have by far not finished my work on the printer yet. Currently I´m working on stabilisation parts and a housing for the electronics - to make it look even more cleaner... It will take some more days until you will see this build in a new outfit.

I do not plan to make a kit out of that, but I´m happy to help others with all my knowledge and experience as long as I find the time to do so.

[alfadex]

Helloo somewhere in the photo is mine

[papabur]

Heres my baby : (I extended all my wires and with a acrylic sheet, I mounted everything under the heated bed..One change I have made since this picture is switching out my RAMPS v1.4/Arduino Mega 2560 for a RAMBo v1.2 board from ultimachine.com....VERY happy with it.