Results 1 to 10 of 62
Thread: Show your RepRap Printers
Hybrid View
-
12-02-2013, 01:18 PM #1
Did you just run two build plates and lock them onto one belt, than cut the borosilicate glass double long? I imaging you have to run a second PS to heat up the second HBP? Looks good!
-
12-06-2013, 04:39 PM #2
- Join Date
- Nov 2013
- Location
- Haram, Giza, Egypt
- Posts
- 22
I've made my own design for the mechanical structure ... and um using the RepRap electronics .. here is my machine ... coming live very soon
04122013608.jpg
-
03-25-2014, 10:20 AM #3
Ooooh very exciting, cant wait to see finished product and prints!!! Definitely keep us posted please! Kits? Are you planning on offering kits if and when the prototype is done? Just asking..
Last edited by papabur; 03-25-2014 at 10:21 AM. Reason: Asking about kits.
-
03-25-2014, 01:45 PM #4
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
Thank you for the compliment!
The I3 was a kit I bought myself, but because of some improvements it looks a bit different now. As I mentioned before, I´m have by far not finished my work on the printer yet. Currently I´m working on stabilisation parts and a housing for the electronics - to make it look even more cleaner... It will take some more days until you will see this build in a new outfit.
I do not plan to make a kit out of that, but I´m happy to help others with all my knowledge and experience as long as I find the time to do so.
-
04-19-2014, 01:51 PM #5
- Join Date
- Apr 2014
- Location
- Greece
- Posts
- 3
Helloo somewhere in the photo is mine
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help