Results 1 to 10 of 62
Thread: Show your RepRap Printers
Hybrid View
-
10-09-2013, 09:06 AM #1
- Join Date
- Sep 2013
- Location
- New Jersey, USA
- Posts
- 494
Show your RepRap Printers
For those of you who have built a RepRap, please show pictures of your printer and things you have created. I'd love to see your hardware!
Larry
-
10-11-2013, 11:06 PM #2
Here is mine as it sits right now. I've done a lot of modifications since I built it. It's a little messy around it, aren't they always
IMG_00001411.jpg
-
10-12-2013, 06:00 AM #3
- Join Date
- Oct 2013
- Location
- Richmond - Tasman - New Zealand
- Posts
- 6
This is my main printer I designed myself using open beam I call the OB1 printer. I have since further developed it into the OB1.4 which is open faced and larger build area. Both printers are using the Azteeg X3 controllers and the OB1.4 also has the Viki LCD display. I have built eight printers now, five Mendel Prusa, one Mendel Max and these two I designed myself. I am moving house right now so my elves workshop is in storage along with my printers but I hope to have them all up and printing again in a couple of weeks time. After buying my first Prusa as a kit I have printed all the parts of subsequent printers using the previous ones.
Wired up 011.jpg
-
10-21-2013, 12:21 PM #4
- Join Date
- Oct 2013
- Location
- Stockport England
- Posts
- 14
Awesome Simon, that is one nice design, very neat clean lines. Have you increased the height from the Mendels and what is the print area?
-
10-21-2013, 12:34 PM #5
Its a Makerfarm prusa, Build volume should be 20.2 x 20.2 x 18 (centimeters)
Btw how do you know my name ^^
Or was the question towards someone else, Unbelievable how many humans are called Simon :P
You should use the nickname instead haha :P
And Harball,
It shouldnt be such a problem, its only 1 kilo and its probably even better for the balance during printing, its probably not that Shackey anymore.
Btw it has 12 contact points with the wood, So it shouldnt be such a problem ^^Last edited by DrLuigi; 10-21-2013 at 12:37 PM.
-
10-21-2013, 04:44 PM #6
- Join Date
- Oct 2013
- Posts
- 9
2013-10-21-163503.jpg2013-10-21-163510.jpg
Not clean at all but it gets the job done with speed and pretty good accuracy. Can't complain except for the small build area (6in cube)
-
10-22-2013, 09:01 AM #7
- Join Date
- Oct 2013
- Location
- Stockport England
- Posts
- 14
-
10-13-2013, 07:41 PM #8
Show off your printer!
Post a photo of your printer...
-
10-13-2013, 07:56 PM #9
i2 Orig.jpg
My original (first!) printer. Modified from when I first got it, but remains 80% the same.
-
10-13-2013, 07:57 PM #10
i3 WIP.jpg
^This is my current WIP printer. I expected it to work earlier, currently I am still building. Not working correctly still. But close. Hacked together a firmware and cobbled together a wiring loom... Everything moves, some not right. Soooooon it will be running.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials