Results 1 to 10 of 15
Thread: Just ordered my CTC :D
Hybrid View
-
10-12-2015, 09:01 AM #1
- Join Date
- Oct 2014
- Posts
- 441
Well mainly because I will have an extra flashforge creator pro bed plate laying around and I have no glass currently :P Its a much thicker bed plate, never had any problems with it other than it quit heating. Easy to level. Ect. Although if I can find a cheap enough sheet of glass around where I live, I may do that for a bit. The one place I called around me wanted $60 for a piece of borosilicate glass cut to size. So obviously not going to that guy. But yeah the main issue is the warp in the middle of that plate. Also I realized the LED is not even turning on with this CTC, so after work today I gotta go through and see whats up with that.
-
10-12-2015, 09:32 AM #2
We got 2ea 6"x9" glass sheets cut from a 10"x12"x3/32" piece,
at Lowes-hardware for about $3.
It's Good quality glass.
When I added the Extenders we had to cut 2 of those 10"x12" sheets,
so cost for those was $6.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials