Results 1 to 4 of 4
Thread: Securing 3d printer
Hybrid View
-
10-02-2015, 11:01 AM #1
- Join Date
- Feb 2015
- Posts
- 91
You could drill a couple of holes in the plastic panels, one on the lower left rear and one on the bottom of the left panel so that you can loop the cable around the left rear metal frame member. Be sure you're above the bottom plate when you measure.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials