Quote Originally Posted by dommer2029 View Post
My FlashForge Creator Pro came with some of these platform stickers (http://www.flashforge-usa.com/shop/p...rint-tape.html) and the first one worked pretty well for a while, but eventually it tore while I was removing a print. So I removed the sticker (which was quite difficult), and now my print bed is covered in sticky residue. I've spent about an hour using elbow grease and acetone to try to clean it, and I'm about 1/3 done at best. Any suggestions for how to get it clean? This is not a process I want to repeat.
I use 3M General Purpose Adhesive Cleaner 08984 which I obtained at the local auto store, that and a razor blade scraper. Soak the adhesive and immediately scrape with the scraper. Remove the gum from the scraper and repeat. 10 minute job max.