Quote Originally Posted by CaptainObvious View Post
I've thought of using vinyl film before, I wasn't sure how it would react when using a heated bed or with the head from the extruder nozzle on the first layers. I'd be concerned over fumes or other chemicals that may be release when heated.
This stuff can take the heat of the bed. It's made to withstand hot surfaces, like signage with hot light bulbs behind them. it sits on window in the sun all day and those temperature are way above 60, 70 degrees. If you think about i,t I would be more worried about heating glues and tapes. First layer prints causes no problem. because the nozzle isn't touching the bed. As long as the nozzle is moving it won't damage the vinyl film.

Try it, test it out. Let me know what you think. Thanks for the reply.