Results 1 to 8 of 8
Hybrid View
-
09-12-2015, 07:43 AM #1
- Join Date
- Jan 2014
- Posts
- 462
Yes.
Yes.
Whatever your extruder steps per mm is set at. You set the steps per mm, tell it to extrude a certain number of mm and it will take that, the steps per mm, work out the number of steps needed to extrude the specified mm length and turn the stepper motor that number of steps. The printer firmware works out the speed it needs to do the extrusion based on the length of the trail that needs to be laid down and the speed at which it needs to be laid down.
No. Think about what the printer is doing - there is a relationship between how much filament is extruded, the length of the extrusion that needs to be laid down and the speed the print head moves while it's being laid down.
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials