Qidi Tech 1 - Replicator 1 clone

[Korhal]

I have been trying to look for new nozzles but a bit confused. Does this printer use MK10 nozzles?

By the way this is an awesome printer and have loved it. Been printing now almost 6 months.

[Syd_Khaos]

I have been trying to look for new nozzles but a bit confused. Does this printer use MK10 nozzles?

By the way this is an awesome printer and have loved it. Been printing now almost 6 months.

Yupyup..these are Mk10s

[huntingdog0]

I am having issues using my printer with simplify3d. Can anyone help me? I have the qidi tech printer and the test prints work. I can't get anything else to print not even downloaded finished projects. I posted a word doc with screenshots of my settings. anyone see anything wrong? I am saving to sd card as an x3g file.....Well The attachments are working for me so here come a bunch of screen shots. Sorry about the inconvenience and hopefully you can see them or download and review them. I also am posting a link so you can download the file in case the posted pics doesnt work because they are showing up as broken images. The link works. just click free user and it will have you confirm the download. Thanks!

[huntingdog0]

I am having issues using my printer with simplify3d. Can anyone help me? I have the qidi tech printer and the test prints work. I can't get anything else to print not even downloaded finished projects. I posted a word doc with screenshots of my settings. anyone see anything wrong? I am saving to sd card as an x3g file.....Well The attachments are working for me so here come a bunch of screen shots. Sorry about the inconvenience and hopefully you can see them or download and review them. I also am posting a link so you can download the file in case the posted pics doesnt work because they are showing up as broken images. The link works. just click free user and it will have you confirm the download. Thanks!

I try attaching the images and a link but the link doesn't show up in the post and whenever the attachment window pops up it says "undefined You do not have permission to perform this action. Please refresh the page and login before trying again."

[jfkansas]

I try attaching the images and a link but the link doesn't show up in the post and whenever the attachment window pops up it says "undefined You do not have permission to perform this action. Please refresh the page and login before trying again."

I believe there is a minimum amount of posts needed to enable picture posting. Also I think the image capabilities of the board are or were turned off.

It is easy to post pics on Imgur or Tinypic and link here. I dislike photobucket as it is ad heavy any more. I host most of my pics from a Google photo account and it works well.

[Talon 3D]

Speaking on my issue with OctoPrint this is what is going on.
Once I save a file I normally send the gcode file to OctoPi and print. For some reason after what I think was an updated it will just pause and never finish during prints. I have taken the same file and gcode does not fully print but the s3g file on being copied to the SD will.
I have rebuilt OctoPrint from scratch and it fixed nothing. First with no updates then with updates.
Here is my print of the same design saved at the same time. No changes. The x3g file printed the fan covers great the cgode I normally send to OctpoPi pauses part way through the raft and just stops. Will not unpause with the lcd menu or on OctoPrint.
Just to make sure nothing was messed up I did another two color frog and it would not even start with the gcode yet the x3g file printed fine.
I did not change any S3D settings either. I am at a loss.
As you can see the failed one with the blob at the corner.

[IMG] [/IMG]

[Talon 3D]

What kind of issues are you having. Are they not printing at all or partially printing?
I have recently had issues with Simplify3D files when sending the gcode files to OctoPrint they fail but if I run the x3g file directly from the SD card they work fine. The same exact one.

Now that being said in Simplify 3D it outputs both the x3g file and gcode file at the same time. If the gocde file is accidentally being the one copied to the SD card that could be the issue as QIDI only prints x3g files from the card yet only gcode from OctoPi.

I am having issues using my printer with simplify3d. Can anyone help me? I have the qidi tech printer and the test prints work. I can't get anything else to print not even downloaded finished projects. I posted a word doc with screenshots of my settings. anyone see anything wrong? I am saving to sd card as an x3g file.....Well The attachments are working for me so here come a bunch of screen shots. Sorry about the inconvenience and hopefully you can see them or download and review them. I also am posting a link so you can download the file in case the posted pics doesnt work because they are showing up as broken images. The link works. just click free user and it will have you confirm the download. Thanks!

[DaveB]

What kind of issues are you having. Are they not printing at all or partially printing?
I have recently had issues with Simplify3D files when sending the gcode files to OctoPrint they fail but if I run the x3g file directly from the SD card they work fine. The same exact one.

Now that being said in Simplify 3D it outputs both the x3g file and gcode file at the same time. If the gocde file is accidentally being the one copied to the SD card that could be the issue as QIDI only prints x3g files from the card yet only gcode from OctoPi.

On my system, S3D always copies both the GCODE and the X3G files onto the SD card. It does not seem to present the QiDi with any issues as the only one it "sees" is the X3G.

[Talon 3D]

What is it doing exactly?
Messed up printing no printing?

On my system, S3D always copies both the GCODE and the X3G files onto the SD card. It does not seem to present the QiDi with any issues as the only one it "sees" is the X3G.

[wachuko]

Well... I need to research more the configuration of Simplify3D for this printer.... AND was not aware that the simple software that comes with the printer, already has raft/support capabilities...

I need to look up all the setting currently in ReplicatorG and use those to start the configuration in Simplify3D

Trying the same part again... with ReplicatorG and Support enabled...