Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 4110

Hybrid View

  1. 03-25-2016, 03:16 PM #1
    sygyzy
    sygyzy is offline
    Technician
    Join Date
    Feb 2016
    Posts
    96
    Can you post some more shots or explain how you attached the bottom (start) piece?

    Quote Originally Posted by jcoahran View Post
    Syd_Khaos - Thanks for the instructions, they proved helpful. For the motor, I replaced the original m3x8mm screws with m3x12mm.


    P1020441.jpg
    Reply With Quote Reply With Quote
  2. 03-25-2016, 03:27 PM #2
    jcoahran
    jcoahran is offline
    Student
    Join Date
    Mar 2016
    Location
    Indianapolis
    Posts
    17
    Quote Originally Posted by sygyzy View Post
    Can you post some more shots or explain how you attached the bottom (start) piece?
    I removed the screw that holds the lower left clear Plexiglas cover to the frame. I used a slightly longer screw in its place through the hole in the bottom start piece.


    P1020445.jpg

    P1020447.jpg
    Reply With Quote Reply With Quote
  3. 03-25-2016, 04:36 PM #3
    KludgeGuru
    KludgeGuru is offline
    Technologist
    Join Date
    Feb 2016
    Location
    Utah
    Posts
    143
    Add KludgeGuru on Thingiverse
    Quote Originally Posted by jcoahran View Post
    I removed the screw that holds the lower left clear Plexiglas cover to the frame. I used a slightly longer screw in its place through the hole in the bottom start piece.


    P1020445.jpg

    P1020447.jpg

    I attached mine on the lower screw, but both work, you just need more links for mine.
    Chain Attachment.jpg
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules