Quote Originally Posted by Merijeek View Post
My neverending battle with ABS continues. I typically have zero issues with PLA, but ABS causes me so many headaches.

Most prints, as long as I manage to get adhesion to the bed, I'm good.

However, I've now got a problem with ABS where I get a good centimeter of printing completed, and then the piece will come free of the glass like so:



Any tips on getting past this issue? It's a continual problem for me with ABS.
I use Aquanet Hair Spray (Purple Can) pretty thick coat. Glass should look frosted. with the build heated to 105-110 deg.
I've also have good luck with Esun ABS filament.