Results 3,501 to 3,510 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
10-07-2016, 07:50 PM #3501
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
Yea, I made it up. It fits in the hole in the middle of the platform and then I drill holes for the adjuster screws that are snug so there is not chance of lateral movement by the bed. Then the piece is bolted to the platform. Adds a little rigidity to the platform. Seems to just tighten things up a little. Cheap easy add on.
-
10-07-2016, 08:20 PM #3502
- Join Date
- Sep 2016
- Posts
- 80
What would one want with PVC stickers?
-
10-07-2016, 09:01 PM #3503
-
10-07-2016, 09:14 PM #3504
- Join Date
- Sep 2016
- Posts
- 80
Ah, that. Got it.
-
10-07-2016, 09:17 PM #3505
- Join Date
- Feb 2016
- Posts
- 360
-
10-07-2016, 09:43 PM #3506
-
10-08-2016, 12:47 AM #3507
Getting weird problems where it will pause itself until I hit unpause on the unit.
Even then it will pause again after a few mins.
Only change in anything was a OctoPi update but it does it with running from the SD card.
Any ideas?Editor in Chief
Bitsonline
Tips Appreciated But Not Expected
BTC: 16wxHvKd3oU6SVjv6FrenqhkvRmc8t7sPy
DASH: XqyaWxH896j9YeV1M35Gzb5gmRPmPbNDGq
-
10-08-2016, 05:36 AM #3508
- Join Date
- Sep 2016
- Posts
- 2
bought a qidi tech in Aug. managed to get around 3 item printed out, then the unit starts blacking out. checked the unit power supply & confirm its kaput. contacted qidi tech & they send me a new power supply (waited around 2 weeks to get it delivered)
after installing the new power supply, the unit come back online, but now both extruder & heated bed can't go past 140deg c & 40 deg c respectively. the temperature reading will fluctuate, one time it shows 140 deg c, the next it shows 138deg c..
feel disappointed already. did i get a problematic unit or what? send out an email to them just now, waiting for feedback.
anybody has faced same issue as me?
-
10-08-2016, 05:53 AM #3509
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
-
10-08-2016, 05:56 AM #3510
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery