Qidi Tech 1 - Replicator 1 clone

[Talon 3D]

I had done that already. I feel like I am missing something simple.
Screenshot (102).jpg

Crank down your extrusion multiplier to .9 if it is 1.00

[DaveB]

I had done that already. I feel like I am missing something simple.

Temperatures, layer sizes etc?

[jfkansas]

Temperatures, layer sizes etc?

Ya need all the vital stats, lol... And better screen shots. Can barely read that.

[Talon 3D]

Here are the last two panels.

Screenshot (103).jpgScreenshot (102).jpg

[DaveB]

Here are the last two panels.

Screen shots would be much more helpful if I were able to read them clearly. I think it looks like you've got the temp set at 230? I missed the bed temp if it's in there somewhere. Don't have any experience with that mfg's filament, but PLA temps are more typically 200/60

[Talon 3D]

I am sorry about the screen shots they are actual large sizes but for some reason the forum software is shrinking them now when just a little while ago it did not. LOL
I had the bed at 80c and the extruder at 220 as lower temps it did not stick to itself.

Screen shots would be much more helpful if I were able to read them clearly. I think it looks like you've got the temp set at 230? I missed the bed temp if it's in there somewhere. Don't have any experience with that mfg's filament, but PLA temps are more typically 200/60

[jfkansas]

Screen shots would be much more helpful if I were able to read them clearly. I think it looks like you've got the temp set at 230? I missed the bed temp if it's in there somewhere. Don't have any experience with that mfg's filament, but PLA temps are more typically 200/60

Haha thats what I said... Need better pics. Definitely 230 is hot for PLA. That is a small part also so might have some cooling issues where the previous layer isn't solidified yet. Looks like a fan is on, but the fan works better on left nozzle.

[DaveB]

Haha thats what I said... Need better pics. Definitely 230 is hot for PLA. That is a small part also so might have some cooling issues where the previous layer isn't solidified yet. Looks like a fan is on, but the fan works better on left nozzle.

LOL - Dept of redundancy dept here J.
Talon, I gather you are using the forums embedded image attachment tools? I was not aware that was "working" again. As that functionality had been totally defunct for several months, I save my pix to a free outside image storage service like imjur or similar, then embed a link to that external image in the posting text.

[DaveB]

Screen shots would be much more helpful if I were able to read them clearly. I think it looks like you've got the temp set at 230? I missed the bed temp if it's in there somewhere. Don't have any experience with that mfg's filament, but PLA temps are more typically 200/60

It also looks like you are using the right extruder which does not get very good cooling airflow from the blower. PLA needs good cooling to do its best, and I see that you do have it on. It just doesn't really get to the right nozzle very well. You might try shifting over to use the left extruder.