Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Hybrid View
-
12-17-2016, 01:40 PM #1
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Hmm, what was the last thing you printed? Just kidding. Check all of the power supply output voltages are getting to the main board. Check that the connections to the LCD are screen are intact, maybe wiggle / re-seat all connectors.
You may need to contact Emily at QiDi in China. Her email address is emily@qd3dprinter.com.
-
12-18-2016, 09:07 AM #2
- Join Date
- Apr 2016
- Location
- Colorado
- Posts
- 35
-
12-19-2016, 09:00 PM #3
-
12-19-2016, 09:04 PM #4
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
-
12-19-2016, 09:09 PM #5
- Join Date
- Apr 2016
- Location
- Colorado
- Posts
- 35
No, I didn't have it unplugged during the down time.
After leaving it turned on over night, the next morning the display showed the normal startup menu. Have now printed several things with no issue. Have turn it off and on several times since that morning without further issue.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion