Qidi Tech 1 - Replicator 1 clone

[jfkansas]

Always start on the low side for multiplier on PETG like .84 or so, it hates overextrusion due to how sticky it is. I would go up on temp to about 250 also.

Ok, giving PETG a try tonight. Going 80 on glass and 230. What do you run for an extrusion multiplier? I am using S3D.

[wirlybird]

Ok, first cube ok at those settings. Extrusion multiplier was at 100.

Going to do another and see.

Always start on the low side for multiplier on PETG like .84 or so, it hates overextrusion due to how sticky it is. I would go up on temp to about 250 also.

[jfkansas]

First cube come out ok?

[wirlybird]

Yes. Hight dimension is good. x-y dimension 19.8mm which is usual. Standard ABS setting except bed at 80. I'll post pics in a bit when the next one is done.

First cube come out ok?