Results 1 to 10 of 17
Threaded View
-
09-11-2015, 07:59 PM #14
- Join Date
- Aug 2015
- Posts
- 256
One on the glass plate: don't bother with those printable corner clips, they don't hold the glass securely enough (at least not for me and I tried four different types). Also stay away from the metal paper clip method, as your extruder will crash into it.
The two best ways I've found to secure a plate is to either tape it down with some kapton/pet tape, or use a silicon thermal pad (0.5mm thick).
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion