Results 1 to 1 of 1
-
08-12-2015, 02:32 PM #1
- Join Date
- Aug 2015
- Posts
- 1
"Alligator skin" on some horizontal surfaces.
I have a Replicator 5th generation. On a few recent prints, I am getting an alligator skin effect on large horizontal top surfaces. Everything else prints fine including smaller horizontal surfaces.
Print settings are 0.3mm, 4% fill, 2 shells. I realize these are very light settings, but the parts are for a UAV and we have been getting very good results otherwise.
Any suggestions would be most helpful. Thank in advance.
IMG_3989.jpg
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery