Results 1 to 9 of 9
Threaded View
-
08-03-2015, 01:59 AM #4
- Join Date
- Jul 2015
- Posts
- 29
Hi EzioYes, I use flexible, but not that much, most by ABS.All filaments I got from Ebay, so never mind is local or not.I checked some files and think that 1.75mm/3mm are because of two different open source technologies, like original Makerbot and Ultimaker. The difference is feeding method, not diameter.Correct me if I'm wrong.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials