Tests, advices and tips

[Alfred_technical_support]

hey guys,please remeber the scanner is optical device, so the light will obviously affect the scanning.and there is a preview window on the left under the turntable mode and calibrating mode.with tripod mode, there will be two there.you should look at it before you do anything, please.thank you.

[Hugues]

hey guys,please remeber the scanner is optical device, so the light will obviously affect the scanning.and there is a preview window on the left under the turntable mode and calibrating mode.with tripod mode, there will be two there.you should look at it before you do anything, please.thank you.

..and maybe to add to this advice, if you see red areas on your object it means it's too bright or overexposed. Use a lower setting in the software or reduce the light.

P.S: great scan Dave !