Results 1 to 10 of 71
Thread: Einscan-S initial review
Hybrid View
-
08-16-2015, 08:10 AM #1
- Join Date
- Jul 2015
- Posts
- 29
"PC" and "CVBS" text in the top right
That means the VGA cable has not been connect correctly.
Or you didn't set the screen resolution rightly.
If you still have this situation, contact me ( yangjianlong@shining3d.com) .
-
08-16-2015, 09:51 AM #2
Just seen this thread response Alfred, or yangjianlong, looks like this is another comment to go in your FAQs, as my problem was the VGA cable wasn't seated properly at the scanner end.
Thanks for the input though, but I'd fixed my issue by then. Sorry for posting in the wrong thread.
Mike
-
08-16-2015, 08:03 PM #3
- Join Date
- Jul 2015
- Posts
- 29
It's nothing.
If you have any advice, please tell me.
Thank you.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help