Einscan-S initial review

[24c]

The software definitely crashes when the cameras do not see the striped images from the projector...

That's interesting, I can't get to the striped images either, as I just get to the white square projected screen with "PC" and "CVBS" text in the top right, and the software hangs.
I have the right PLE file too, as I can calibrate
Here's hoping hugues replies, because he has a similar set up as mine.

[Alfred_technical_support]

"PC" and "CVBS" text in the top right
That means the VGA cable has not been connect correctly.
Or you didn't set the screen resolution rightly.
If you still have this situation, contact me ( yangjianlong@shining3d.com) .

[24c]

Just seen this thread response Alfred, or yangjianlong, looks like this is another comment to go in your FAQs, as my problem was the VGA cable wasn't seated properly at the scanner end.
Thanks for the input though, but I'd fixed my issue by then. Sorry for posting in the wrong thread.
Mike

[Alfred_technical_support]

It's nothing.
If you have any advice, please tell me.
Thank you.