Results 1 to 6 of 6
Hybrid View
-
10-21-2015, 04:56 PM #1
- Join Date
- Dec 2013
- Location
- Georgia
- Posts
- 934
The very first thing I did when I got my MOD-t was to put blue painter's tape on the bed... Then after figuring out that it was 15 year old blue painters tape that was bought at a dollar store, I went and got some actual quality tape and put that down on the bed.
Since then I'm roughly 30 prints in without even one coming loose.
Seriously, fresh blue painter's tape is magical for PLA.
-
10-21-2015, 05:09 PM #2
- Join Date
- May 2014
- Posts
- 16
I have been using tape on another printer, but I thought I'd give New Matter the benefit of the doubt at first and see how their solution works.
Really only did that since we know the print surface is easily replaceable. Not yet, and we don't know a price yet, but I figured it was worth it.
I will be using tape for the next few prints. Also that wipe concerns me, and using a replaceable piece of tape will be so much easier.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials