Results 1 to 8 of 8
Hybrid View
-
07-05-2015, 11:32 AM #1
Actually, it's not the scan that fails, but the alignment.
I can scan properly in free scan mode, the first scans comes out nicely, the second one as well, but when i ask the system to align them, this is where it starts to get ugly.
Advice on proper alignment would be really needed here.Last edited by Hugues; 07-05-2015 at 02:47 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help