Results 1 to 4 of 4
Thread: SDcard compatability
-
05-29-2015, 01:23 AM #1
- Join Date
- Mar 2015
- Posts
- 5
SDcard compatability
Hi I have just bought a 32mb micro sd card and adapter the card is a grade 10 card and when I put it in the printer it says it cannot recognise the card try formatting to fat 16 ? the card is currently fat 32 and on my pc I can only format fat, fat 32 or ntfs can anyone help with this, if not the card is not wasted as it works in my camera,
-
06-08-2015, 10:07 AM #2
Hi,
I know 16Gb cards work fine, however I think the Makerbot firmware higher than 7.4 removes SD compatibility.
-
06-09-2015, 06:49 AM #3
- Join Date
- Mar 2015
- Posts
- 5
Hi thanks for the info, I will stick with the firmware that is supplied as standard version1 it says , I would love to update but am worried about turning the printer into a huge doorstop lol.
-
06-28-2015, 11:32 AM #4
All our printers shipped with at least 7.2/7.3 firmware. There is no major improvements to the firmware after that.
You will be fine with your version.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials