Post your scans here !

[airguy]

Thank you , i will try it for fun anyway !

[eTraxx]

Ok. Having seen some of the magnificant scans posted here mine seems somewhat primative. Still. Here goes. This was done using the turntable, hi-res. Model was sprayed with white primer. I scanned it with the tires down, then a scan on the right and left side. .. Next will be trying free scanning.

comparephotos.jpg

[manish]

hi,

i am the new member of Ein-scan.
Quality wise hats off.
Still struggling with accuracy.
not achieving what was expected less than 0.1mm.
Here are some images of scan, i did.

[manish]

hi,

i am the new member of Ein-scan.
Quality wise hats off.
Still struggling with accuracy.
not achieving what was expected less than 0.1mm.
Here are some images of scan, i did.6.jpg7.jpg8.jpg9.jpg11.jpg

[Eric_Wang]

Hi manish:

The accuracy of one-shot scan is 0.1mm, not the whole scan .

Eric

[Hugues]

Hi manish:

The accuracy of one-shot scan is 0.1mm, not the whole scan .

Eric

So then it means what we lose compared to 0.1mm is due to the alignment process ?

I wonder if we can achieve a better accuracy when aligning with Meshlab. Although it's more time consuming.

[cadcare]

hi manish,
can you upload this stl file to mediafire to check the scanning quality. if youi are in india please send your address or cell no.

[manish]

hi cad care,

you are from india?
which place?
my number is 9920997945

[curious aardvark]

hi cad care,

you are from india?
which place?
my number is 9920997945

lol was going to say you probably don't want your number on the web.
But then as 99% of call centres are in india - you're probably safe :-)