Recommendations for an SLA / DLP Printer?

[kudo3D]

You should check out our Titan 1 that utilizes our patent-pending passive self-peeling technology, which minimizes post-processing.

The Titan 1 has an XY resolution ranging from 37-100 microns, but can actually go down to 25 microns with a modification to the project. (However, we do not advise this unless the printer is used to print at 25 microns frequently because it will give up the projector's warranty)

Additionally, the Titan 1's max build size is 7.5 x 4.3 x 10.0 (inches) and can print as fast as 2.7 in/hr.

Here is a comparison with other printers in the same range:
http://www.kudo3d.com/products/ (scroll to the bottom)

Please view our gallery: http://www.kudo3d.com/gallery/

If you have any questions, you can email me at catherinepark@kudo3d.com.

[kilroy]

Thank you.

Is the Kudo a SLA or a DLP printer?

Kilroy

[kudo3D]

Thank you.

Is the Kudo a SLA or a DLP printer?

Kilroy

It is a DLP printer, with the projected included. XY resolution ranges from 37-100 microns, but can reach 25microns with a modification in the projector.