Results 1 to 10 of 10
Thread: Printing off-center
Hybrid View
-
12-01-2017, 06:16 AM #1
one thing to check is that your printing start point is not set to: 0:0 as that is the top right corner.
For the bed size on the creators it should be: 110:75 (or the other way round). Basically you divide the width and length of the bed by 2 for your X & Y start point and that's your centre point.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials