Results 1 to 7 of 7
-
06-03-2015, 06:58 AM #1
- Join Date
- May 2015
- Posts
- 31
Blue Masking Tape? Will That work for Build Tape?
I saw on an article that someone uses 3M Blue Masking tape for their printer.
Is that okay? If that's the case, I'll go to Lowels and buy a big roll of it today. Save money that way.
I kind of find it funny if printers charge us that much for the supplies when it is just that. Oh well, what are you going to do.
Thanks for the advice.
-
06-03-2015, 07:10 AM #2
yes it works really well.
I've used duck brand blue painters tape.
3m works just as well.
-
06-03-2015, 07:17 AM #3
- Join Date
- May 2015
- Posts
- 31
Thank you! Just saved a lot of my stress!
-
06-03-2015, 08:13 AM #4
lol no worries.
One tip - heat the bed to about 60c when you apply it. That way it really sticks.
Also don't calibrate the bed too tight or you'll have problems getting the prints off the tape.
-
06-03-2015, 08:42 AM #5
- Join Date
- May 2015
- Posts
- 31
Thank you for that other tip on calibrating the bed. I just leave that alone with printer settings.
-
06-03-2015, 08:43 AM #6
-
06-03-2015, 08:55 AM #7
- Join Date
- May 2015
- Posts
- 31
Thanks man.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help