Results 1 to 10 of 66
Thread: Mount and Reservoir Discussion
Hybrid View
-
01-12-2016, 10:41 PM #1
- Join Date
- Sep 2013
- Location
- San Diego
- Posts
- 210
Just got the separatory funnel I mentioned on the last page. Here is a picture of my setup:
For those who might consider a set up like this, you can save yourself a good bit of coin on a stand using a barbell weight and a metal dowel. If you have a tap and die kit, you might have everything you need around the house. Take a barbell weight of sufficient size (25 pounds, in my case), drill a hole slightly smaller than your dowel, tap the hole and the dowel, and now you have a heavy duty stand.
If you need even more room to mount clamps to, like for multiple reservoirs or printers, you could by a lab frame, but they cost a ton. With two barbell weights, some 7/16 dowels from a hardware store, and some bar clamps, you can save yourself around $950.Last edited by Anuvin; 01-12-2016 at 11:03 PM.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials