Results 1 to 10 of 66
Thread: Mount and Reservoir Discussion
Hybrid View
-
06-16-2015, 09:08 PM #1
- Join Date
- May 2014
- Location
- hiding in your pillow
- Posts
- 52
You might try some braided vinyl tubing. The stuff I have is rated for 250 psi.
-
06-16-2015, 11:48 PM #2
- Join Date
- May 2015
- Location
- Near Seattle
- Posts
- 23
Yeah, that's what I have in mind to try after I get a sensor (and probably an emergency release valve). Will the braided stuff hold around 100psi with barb connectors and zip ties? Rather not have the connections pop off under pressure.
Last edited by Toasterboy; 06-17-2015 at 12:49 AM.
-
06-17-2015, 11:23 AM #3
- Join Date
- May 2014
- Location
- hiding in your pillow
- Posts
- 52
I usually use barbed fittings and worm gear hose clamps. I'm not sure if zip ties will provide enough pressure.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials