Results 1 to 10 of 10
Thread: Sticking too well!
Threaded View
-
05-30-2015, 02:41 PM #8
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
Spraying one of those canned dusters upside down will do the same thing.
I once had trouble with a piece printed in ABS warping. I tried all the adhesive options, with no luck. Then I tried using blue painter's tape, with hairspray on the tape, with ABS juice on the hairspray. The ABS still warped, but it stuck so well that it flexed the glass too, breaking it.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials