Results 1 to 5 of 5
Thread: problem with quality print
Hybrid View
-
06-18-2015, 04:02 PM #1
- Join Date
- Jan 2014
- Posts
- 462
If your belts are tight, you might have bad or worn bearings, especially on the Z axis. This is easier to check on a kit printer, as you can decouple the Z axis motors and check for free movement of the axis (it should be obvious from the sound if you've got bad bearings).
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help