Results 1 to 2 of 2
Thread: Help with a pseudo-Form1
Threaded View
-
05-21-2015, 04:17 AM #1
Help with a pseudo-Form1
Hi guys,
I recently purchased a pseudo-Form1 (Chinese). I replaced the building platform, tank and resin materials with Formlabs original, but I cannot print anything.
As a test file I used this: https://www.dropbox.com/s/ffhhv3tshl...jango.stl?dl=0
What happens is that the work does not adhere to the platform and it remains a "blob" cured on the bottom of the tank.
The laser seems to work properly. I upgraded the firmware to the latest version without any problems.
Any suggestions on what might have gone wrong?
Many thanks!
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help