Well I swapped the SKR v1.4 Pro in for a test print. The swap wasn't too much hassle, the RRF config from Sbase worked quite nicely as a base for the LPC RRF online configurator. The Trinamic drivers are quiet, the Sbase isn't bad but the DRV8825 tend to have some random low noise coil whine is noticeable.
Anyhow, the print result was exactly as with Sase, so it's not a problem with the DRV8825 drivers. Just Dollo doing it's thing I guess.
Will be going back to Sbase.
IMG_20200829_205415.jpg