New bed carriage part in the making, lots stiffer that previous iteration. Also switched to printed bolts

https://dl.dropboxusercontent.com/u/...2014.48.24.jpg
https://dl.dropboxusercontent.com/u/...2014.49.01.jpg
https://dl.dropboxusercontent.com/u/...2012.42.25.jpg

For the translucent part the settings were 3 perimeters and 30% infill. Took almost 9 hours to print on Prusa MK2. Maybe bit overkill, but what the heck... cheap 3D Druck PLA.