Results 1 to 10 of 110
Thread: Dollo 3D Printable 3D Printer
Threaded View
-
04-01-2019, 03:09 AM #23
- Join Date
- Oct 2016
- Posts
- 184
Mounted the bed properly, added part cooling fan and wired them properly. After leveling the bed and a couple of test prints I got this benchy printed:
2019-03-31 16.58.55.jpg2019-03-31 16.59.00.jpg2019-03-31 16.59.18-1.jpg
Looking quite good.
Had some jamming problems on the first try, reduced retraction a bit and added filament oiler, no more jams. Also other Z-motor was binding occasionally due to the coupler being just a bit too tight fit, fixed that by wrinting some g-code to move the bed up and down and using a file to smooth out the coupler while moving.
Need todo something about the wiring next and also mount the PSU to the frame.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials