Results 1 to 10 of 12
Thread: Printrbot Metal Plus : Mods
Hybrid View
-
05-07-2015, 01:46 AM #1
Almost finished with my version of the LCD screen support. Happy with how it turned out so far. Printrbot Support gave me the ref at digikey for a longer SD cable.
The SD backplate hole is too small to connect the SD cable on the 1412 at the moment unfortunately (due to the 90° plug). BUT, Printrbot Support promised to send me a retrofit this month. You can see the new iteration of the Metal+ (1504) is already modified to tackle all that.
IMG_20150507_073005.jpgLast edited by LambdaFF; 05-07-2015 at 01:49 AM. Reason: Typo mistakes
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion