Results 1 to 3 of 3
Thread: Prusa i3 Z axis Backward issue
-
05-01-2015, 06:18 PM #1
- Join Date
- Apr 2015
- Posts
- 16
Prusa i3 Z axis Backward issue
Hi
Thought i would post this in here in hope of help, Just setting up my Prusa i3 and for some reason as soon as the machine starts a print job (test) it immediately wants to go to the top of the Z-axis, i am stopping it with a sesnor or it would just keep going, i stop it at the top and it starts running the print job backwards on the X axis, I have switched the motor wires around and it is no differant, even changed the direction in settings but still wants to start at the top, at the end of a job it returns to the bottom corner but as soon as it starts a job it wants to go straight up! Help
-
05-01-2015, 06:30 PM #2
- Join Date
- May 2014
- Location
- hiding in your pillow
- Posts
- 52
sounds like your limit switch is wired up backwards.
-
05-02-2015, 06:31 AM #3
- Join Date
- Apr 2015
- Posts
- 16
Genius! i swapped the wires around for the sensor on the mainboard and hey presto! Printer working perfectly now! Thank you, Appreciated
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials