Results 1 to 4 of 4
Thread: Inverted Z-axis
Hybrid View
-
05-18-2015, 07:30 AM #1
I understood - in the firmware have options that set the direction of motion along the axis:
#define INVERT_X_DIR true
#define INVERT_Y_DIR true
#define INVERT_Z_DIR true
true or false determine the direction
-
05-19-2015, 04:57 PM #2
Yes... You can flip the direction of axis movement by changing those #define's. But make changes carefully. Check them out with PronterFace and be ready to press the Reset button! The problem is you also have to have your limit switches #define'd correctly. So, if you get things to move rationally with PronterFace, you can use the M114 command to verify the limit switches are detecting the end of travel on a given axis.
That is a very nice looking printer! I wish my printer was made like that.
-
05-20-2015, 04:01 AM #3
Thanks for the help!
If I move the node to the other side, I quickly pressed a hand to the limit switch.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help