Results 1 to 2 of 2
Thread: Z18 limit to small prints
-
04-20-2015, 06:05 AM #1
- Join Date
- Mar 2015
- Posts
- 18
Z18 limit to small prints
Hi all,
Does anyone have experience with small (<50mm) prints at good quality on a Z18 as parts only come out correctly at larger sizes. Often stringing on the base.
- 0.15mm resolution
- 5th Gen High Base
- 200 °
- Lower to 180 ° on Color Fabb to stop raft stick
- Roof layer count 4
- Shells 2
- Outlines 15
For moving parts I change: - "feedDiameter": 1.80,
- "feedstockMultiplier": 1.10 on small parts doesn't work tried higher values but too many holes in prints
-
04-22-2015, 09:06 AM #2
- Join Date
- Sep 2014
- Posts
- 19
Hi,
Z18 is designed for bigger prints and the quality is also great. Do you have a lot of retractions of the small parts? Have you tried using Dust filter, it can reduce the stringing and increase the quality of the parts.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials