Results 1 to 10 of 13
Thread: PETG solvents
Hybrid View
-
04-14-2015, 02:07 PM #1
- Join Date
- Feb 2015
- Posts
- 17
First attempt with Klean Strip produced mixed results. 30 min soak turned the test piece (2 mm thick walls) completely opaque and rubbery. I either need a much shorter soak, or vapor smoothing as described in the article.
I'll try polishing with a dremel too.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help