Results 1 to 10 of 11
Hybrid View
-
03-27-2015, 09:36 AM #1
- Join Date
- Oct 2014
- Posts
- 41
Prints have started to lean......
Hi All
My prints have started to lean along the Y Axis -any ideas what could be causing this - the bed appears to be moving freely.
Im using a Ordbot Hadron
cheers Graham
-
03-27-2015, 01:58 PM #2
-
03-27-2015, 08:02 PM #3
-
04-03-2015, 01:58 AM #4
-
04-01-2015, 02:05 PM #5
- Join Date
- Oct 2014
- Posts
- 41
-
03-27-2015, 11:09 PM #6
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
-
03-28-2015, 11:38 AM #7
- Join Date
- Oct 2014
- Posts
- 41
-
03-28-2015, 04:52 PM #8
-
03-28-2015, 05:37 PM #9
- Join Date
- Oct 2014
- Posts
- 41
The bed and hot plate should move along the axis freely without sticking - i.e should be free to move. I was stating this to try and eliminate movement along the axis as a possible issue.
Ive printed another item and there appears to be a step every 5ish mm along the Y axis which causes the object to lean for taller printed objects.
-
03-28-2015, 10:57 AM #10
- Join Date
- Jan 2014
- Posts
- 462
This might be obvious, but have you checked that the frame is square?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help