Results 1 to 10 of 16
Hybrid View
-
03-28-2015, 12:34 AM #1
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
The slicer just had failed on your cylinder.
This happens often with thin wall extrusion, fast print and on top of that if you ever print with high Z layer .
One solution to check, print one, but slowly with .1 or .2mm height AND try to increase thickness of the object itself.
-
03-28-2015, 04:15 AM #2
- Join Date
- Mar 2015
- Posts
- 7
-
03-28-2015, 05:13 AM #3
- Join Date
- Mar 2015
- Posts
- 7
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help