Results 1 to 10 of 16
Thread: PEEK Filament for FDM Printers
Hybrid View
-
11-05-2015, 06:54 AM #1
BenB,
We've had the best results by printing a thin layer of polycarbonate, then printing the PEEK on that. Be prepared to sand the polycarbonate off - the bond is that good. The PC sticks fine to the glass with the bed at 85C.
Please let me know if you have other questions.
Davo
-
11-05-2015, 08:56 AM #2
- Join Date
- Nov 2015
- Posts
- 2
Hi Davo,
thnx for the quick response, we're gonna try that.
BenB
-
11-11-2015, 04:30 PM #3
- Join Date
- Nov 2015
- Posts
- 1
-
11-11-2015, 05:14 PM #4
MikeG3,
I haven't made any solid or mostly solid PEEK parts to try machining.
I'll post here when I do.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials