well that's odd. I posted with pics this morning. and it's not there now. weird.

basically bluetape stuck to pet tape on ahot bed - will stick any print. The hard bit is removing the print lol

But I do now have a fully working leg.
Interesting thing the blue tape bonds that well to the pet tape that both are coming off together.
Which means that prints cannot pull thebluetape up like they might normally do.
Did two prints - about half the plate covering destroyed in removing both prints. lol

This could be the ultimate non-warp, total stick, one use, bed covering :-)

Should have enough intact covering left for the second foot :-)
Might have a go at printing the second leg outer on the knp as I've got the cooling duct fitted now.