Results 1 to 6 of 6
Thread: Layer Height Issues
Threaded View
-
03-01-2015, 12:14 AM #5
- Join Date
- Nov 2014
- Posts
- 58
im printing at 0.3mm = 75 steps
0.24mm = 60 steps
0.2mm = 50 steps
can layer width affects this ? i see that in s3d you can adjust your layer width. i read in other forums that this needs to be at leat 20% bigger than the nozzle diameter. so for a 0.40 nozzle should be set at least at 0.48 ?
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials